Exhaust air chimneys
for efficient and optimised air extraction
Big Dutchman offers an extensive product range of exhaust air chimneys and corresponding chimney fans to ensure that exhaust air extraction is ideally matched to the animals’ needs. Thanks to the flowoptimised chimneys, the fan’s air flow rate improves, making the exhaust air volume flow especially efficient.
The fans used in the chimneys, with sickle-shaped blades, are of excellent quality. The blades are made of aluminium in a moulded die-casting process and are, therefore, proof against severely Cold conditions and resistant to corrosion. Due to their aerodynamic shape, they are even more efficient and resistant to pressure and produce less noise than traditional fans. The following chimneys and exhaust air principles can be used:
- CL 600 and CL 820 exhaust air chimneys
- wall chimneys
- MultiStep, Dynamic MultiStep and DynamicAir control principles
- BD exhaust air chimneys VC
- centralised exhaust air extraction
CL 600 and CL 820: the originals for climate professionals
Versatile exhaust air chimneys with a unique design
The Big Dutchman CL series exhaust air chimneys have proven their worth hundreds of thousands of times in the past 25 years and come with the following exceptional characteristics:
- aerodynamic design for efficient air extraction;
- made of polypropylene with a smooth, dirt-repellent surface for high stability;
- resistant to sunlight and frost and therefore very durable;
- easy to clean with a high-pressure washer;
- labyrinth seal installed between roof duct and roof sheet for watertightness;
- no additional sealing material required;
- the self-supporting design means that supplementary suspension or bracing is unnecessary;
- roof sheet and external ducts are made of GRP to allow for adjustments on site;
- the roof sheet is supplied according to roof slope and profile, side or ridge installation and height above roof;
- easy to install;
- the CL 74 actuator reduces the volume flow exactly as required for minimum ventilation.
Guide vane for CL 600 and CL 820
For a significantly increased working range of the chimney
The guide vane is simply screwed tightly to the exhaust air chimney, right above the fan. The exhaust air jet is concentrated by deviating the radial and circular air flow ontrol components. This leads to a significantly increased working range of the chimney. The guide vane can be retrofitted easily.
Важни преимущества
- up to 80 per cent increased working range of the chimney;
- only minimal decrease (approx. 3 per cent) of the chimney’s air flow rate;
- no chimney extension required, i.e. no storm bracing and no unattractive outward appearance of the house;
- economic alternative to a chimney extension;
- quick and easy Installation.
CL 600 and CL 820 exhaust air chimneys for wall installation
Very good adjustability and pressure resistance even at low air flow rates
The CL 600 and CL 820 exhaust air chimneys are well suited for installation into a gable end or side wall. Compared to simple wall fans, wall chimneys can control the exhaust air volume flow more precisely thanks to the motor-driven shutter, especially with minimum ventilation.
They are also less susceptible to wind. The exhaust air volume can thus be aligned more accurately with the animals’ actual needs. For space and weight reasons, a diffuser is not part of the standard equipment, but is an option when ordering.
ECblue
The innovative fan with high potential for energy savings
ECblue fans not only save energy but are also extremely resistant to pressure and thus even less susceptible to wind. Pressure stability is especially important with minimum ventilation. The noise level of the ECblue fans is also approx. 50 per cent lower than that of standard fans.
ECblue is powered by an external-rotor EC motor. In combination with Dynamic MultiStep, you can save up to 50 per cent in electricity costs compared to traditional systems!
Важни преимущества
- very high energy-saving potential;
- high efficiency in the entire speed range;
- universal activation via a 0-10 V analogue signal;
- the pre-set ventilation level is precisely maintained due to the built-in speed feedback;
- very low noise level thanks to corrugated blade edges;
- easy installation.
MultiStep
The exhaust air control principle for stepless ventilation
MultiStep combines stepless control and on/ off group control. The benefit: stepless Ventilation that optimally meets the livestock’s needs. The entire ventilation system is more pressure-stable and less susceptible to wind.
The climate computer controls just one exhaust air chimney steplessly from 0 to 100 per cent and only starts up additional chimneys at full capacity (on/off method) when required.
The CL 74V actuator is used to control one or two exhaust air chimneys steplessly. If more than two chimneys are to be controlled steplessly, the CL 74 actuator is also available for an analogue 0-10 V control signal. For the on/off method, the chimneys are divided into groups. The CL 74 actuator (on/off) is used for this method. All actuators are installed directly at the adjusting axis of the butterfly valve/damper and are supplied with 24 V power. This makes for a simple and safe emergency opening system in case of power failures (378 T).
Dynamic MultiStep
The energy-saving exhaust air control principle for stepless ventilation
The enhanced version of the well-proven MultiStep exhaust air control principle is called “Dynamic MultiStep”. Dynamic MultiStep works exclusively with the new, extremely energy-saving ECblue fans. Instead of starting at 100 per cent speed, these fans begin working as low as approx. 50 per Cent of maximum speed.
Only after all fans in the house have been started one after another at 50 per cent (a value that may vary depending on the required pressure resistance) is their speed increased simultaneously to 100 per cent when the ventilation demand requires this. Compared with the MultiStep solution, the power consumption of the new Dynamic MultiStep control principle is another 50 per cent lower!
Very clever: lowering the speed by half requires just one eighth of the energy! A climate computer is responsible for controlling this system as well.
DynamicAir
For precise recording of the volume flow of exhaust air chimneys
The DynamicAir principle was invented to optimise the air exchange in livestock houses even further. With minimum ventilation rates, especially, it is very important to know exactly how much air passes through the exhaust air chimney to be able to provide optimal climate conditions for the animals and to reduce the heating costs at the same time. For this purpose, the DynamicAir sensor is installed in the chimney’s aspirating mouth. The sensor transmits the measured signal to the climate computer, which translates the signal into the respective exhaust air rate. This permits a very accurate control of the air exchange. The Climate computer contains the characteristic curve of the extraction unit as determined in a test facility. The chimney’s volume flow is not reduced!
Важни преимущества
- very accurate recording of the air flow rate of exhaust air chimneys without any
- additional mechanical/moving components;
- reduction of heating costs thanks to precise minimum ventilation;
- suitable for both new buildings and for retrofitting*;
- long service life at a continuously high operational reliability.
* only in combination with the 307pro, 310pro and ViperTouch climate computers
BD exhaust air chimneys VC
With different pipe diameters
The BD exhaust air chimneys VC are available with several different diameters and can, therefore, be easily adapted to any ventilation system and spacing of roof trusses.
They are made of 30 mm thick polyurethane pipes coated with smooth, glass-fibre reinforced polyester. This means that all VC chimneys are well-insulated, condensation is prevented and noise is reduced.
The chimney pipes are delivered in halves (VC) and are assembled on site, thus saving transport costs. They are, however, also available as fully-assembled pipes (AF). A roof sheet seals all chimneys.
Centralised exhaust air extraction
To bundle the sources of emission
Reducing emissions from livestock houses will become increasingly important in the future. In some countries, authorities already require that the exhaust air be extracted at one central point (bundled), and that this point of exit be installed at a height of no less than 10 metres. A bundled emission system works like a large chimney with a stable airflow.
Важни преимущества
- separation of exhaust air from animals for significantly improved hygiene;
- no leaking air caused by idle fans;
- no openings for unwanted leakage of rain water into the building;
- no undesired incidence of light;
- no issues with the static values of the roof;
- thorough and easy cleaning of tower and chimneys with a high-pressure washer, without entering the house;
- simple installation of the chimneys on the tower;
- no stability issues during strong winds.
